Victron Energy Argofet 200-2 Two batteries 200A – ARG200201020R VE Bus BMS The use of high purity

The use of high purity materials and lead calcium grids ensure that for both AGM and GEL products have particularly low self-discharge so that they will not go flat during long periods without charge

1600 running watts and up to 11 hours run time

000 W Min PPT Voltage: 90 V Max PPT Voltage: 560 V DC Startup Voltage: 100 V DC Shutdown Voltage: 90 V Max Input Voltage: 600 V Max DC Power: 7

1 x 240V 13 Amp

Victron Energy Argofet 200-2 Two batteries 200A – ARG200201020R VE Bus BMS The use of high purityIn contrast with diode battery isolators, FET isolators have virtually no voltage loss. Voltage drop is less than 0,02 Volt at low current and averages 0,1 Volt at higher currents. When using ARGO FET Battery Isolators, there is no need to also increase the output voltage of the alternator. Care should taken however to keep cable lengths short and of sufficient cross section. Example: When a current of 100 A flows through a cable of 50 mm2 cross